KRS-F-E08 HR3 24 V AC/DC
Description
The threshold gate switches units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay is activated. When the input voltage falls below the switch-off threshold, the relay is released again. The module is designed for a two-level control by means of an analog 0 to 10 V DC control signal.
- Connection with spring clamp terminal blocks (push-in)
- Control signal 0 V DC = Level 1 active
- Control signal 5 V DC = No level is active (OFF)
- Control signal 10 V DC = Level 2 active
- with manual control level
- Not intended for marketing in North America
Technical Data
General Data
24 V AC/DC
100 mA
35 mA
250 V AC
1 x changeover contact with 0 position
AgSnO2
4 A
1200 cycles/h
1 x 107 switching cycles
1 x 105 switching cycles
Yellow and red LED
22,5 x 61,3 x 60 mm
70 g
-10 °C to 50 °C
-25 °C to 70 °C
IP40 / IP20
Check US distributor inventory
Part number
11066570
4251394628400
Downloads
- Data sheet
- 3D-Data - Registration required -