MR-F-SM3 Modbus RTU
Description
The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example asymmetry, phase failure, phase sequence, overvoltage and undervoltage. These values can be queried via a Modbus-Master. Module address, bit rate and parity are set with two rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.
- Connection with spring clamp terminal blocks (push-in)
- Not intended for marketing in North America
Technical Data
General Data
Modbus RTU
00 to F9
RS485 (two-wire bus)
1200 to 115200 bit/s
24 V AC/DC +/- 10 % (SELV)
108 mA (AC) / 50 mA (DC)
100 %
3 x analog
230 V AC -20 to +15 %
184 V to 265 V AC
0 A to 16 A AC
LED green, red
50 x 69.3 x 60 mm
110 g
-5 °C to 55 °C
-20 °C to 70 °C
IP40 / IP20
radiated emission according to EN 61326-1 class A
Check US distributor inventory
Accessories
Accessory of
Part number
1108411370
4251394620718
Downloads
- Brochure (Intelligent system components with integrated application software)
- Brochure (Data logger)
- Brochure (Modbus Gateway - Network connection of Modbus RTU fieldbus components)
- Brochure (Modbus RTU components)
- 3D-Data - Registration required -
- Mounting note (11084113, 1108411370)
- Mounting note (Safety Instructions multilingual )
- Data sheet
- Software manual