The ultimate solution when space is limited – METZ CONNECT Ultraflex500 patch cords
With the Ultraflex500 patch cord from METZ CONNECT, you no longer need special patch cords with preferred outgoing directions such as to the right, left, up or down. Due to the extremely short grommets molded onto the connector, bending radii of less than 10mm are possible. In combination with a very flexible and robust cable, you achieve an unprecedented flexibility for your application for use with VoIP devices, cameras, WiFi hotspots and other cramped applications.
Ultraflex500 patch cords are particularly suitable for applications in media technology and for optimized cable management in the network cabinet or at the workplace:
Wherever there is a lack of space and lots of movement.
Due to their high quality construction with LSOH jacket, particular importance is attached to the relevant safety aspects in the event of a fire. They produce little smoke compared to commercially available PVC patch cords and do not release any halogens.
Specifications
-
particularly suitable for unshielded and shielded Class EA systems
-
fully shielded Cat.6 patch cord AWG 26/7
-
two shielded RJ45 plugs, wiring 1-1
-
Cable type: S/FTP 4x2xAWG 26/7 PIMF
-
Cable sheath LSHF (LSOH), halogen-free
-
Suitable for 10GBit (Ethernet / IEEE 802.3an), remote powering (PoE, PoE plus and UPoE; IEEE802.3af) and HDBaseT
Link model
Advantages
- optimal solution in case of lack of space
- bending radii of up to 10 mm possible
- very short kink protection
- significantly longer durability than standard patch cords
- easily up to 8500 movement cycles under load
- particularly suitable for VoIP devices
Currently available in white, gray and black.
Areas of application
- office wiring
- event technology
- media technology
- home wiring
- data centers
Additional material:
- product information "RJ45 patch cord Cat.6 Ultraflex500 VoIP AWG 26"
Do you have any questions on this topic?
Then simply contact your METZ CONNECT employee using the link below: