|

MR-DIO4/2-IP65 Modbus RTU 230 V

Description

The Modbus module inan IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs have to be connected to potentialfree contacts. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches. Bit rate and parity are also set by software.

Technical Data
General Data
Modbus RTU
00 to 99
1200 to 115200 bit/s, Factory setting 19200 bit/s Even
RS485 two wire bus with potential equalization in bus or line topology terminate with 120 Ohm
230 V +/- 10 %
12 mA
100 %
4
30 V AC/DC
more than 8 V AC/DC
2 changeover contacts (DPST)
250 V AC
10 A per relay (65 A for 20 ms) max. current via terminal "11" 10 A
160 x 40.7 x 120 mm
350 g
any
directly on a flat surface 8 knock-out openings for M12 and M16 cable glands
23 °F to 131 °F (-5 °C to 55 °C)
-4 °F to 158 °F (-20 °C to 70 °C)
IP65
green LED
red LED
yellow LED's
Check US distributor inventory
Part number
1108330526IP
4251122197390
Downloads
× Do you have any questions?