|

E-DAT modul Cat.6A 8(8) jack

Description
  • modular termination unit Cat.6A, RJ45
  • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified
  • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1
  • tested: Link up to 500 MHz
  • easy to install connection of 2 to 4 pair data lines
  • AWG 26/1 - 22/1 and stranded wires with 7 copper conductors AWG 26/7 - 22/7 to BTR 8-fold insulation displacement connectors (IDC)
  • marking of conductor assignment to T568A and T568B
  • easy and fast insertion of wire pairs in E-DAT modul stuffer cap
  • module housing made of refined zinc die-casting
  • mounting without special tools
  • strain relief with cable tie at the module
  • dust cover amounting option
  • mounting version: MC Modul
  • cable feed 180°
  • delivery in a 10-piece set, available separately
Technical Data
General Data
  • office areas
  • data center
M1
I1
C1
E2
Jack
shielded
Copper
T568A and T568B
metallike
43.85 mm
14.7 mm
22.4 mm
1.726 in.
0.579 in.
0.882 in.
41.3 g
0.0911 lb
yes
yes
on housing
Transmission characteristics
6A
EA
6A
yes
IEEE 802.3af
IEEE 802.3at
yes
IEEE 802.3bt
yes
IEEE 802.3an
Connections/interfaces
IDC-connection
RJ45-jack
1
1
8
8P/8C
AWG 26/1 - AWG 22/1
0,128 - 0,324 mm²
0,409 - 0,643 mm
0,016 - 0,025 in.
AWG 26/7 - AWG 22/7
0,141 - 0,355 mm²
0,483 - 0,762 mm
0,019 - 0,03 in.
5.5 mm
10,00
0.197 in.
0.394
180°
flexible contact spring
Electrical characteristics
max. 1 A
max. 50 V
max. 20 mOhm
max. 200 mOhm
min. 500 MOhm
min. 1000 V DC
Mechanical data
module
snap-in function
max. 20 N
top
with cable tie, attached to module
Materials and material properties
GD-Zn (zinc die-cast)
CuSn (tin bronze)
Sn (tin)
Spring steel
Ni + Au (nickel-gold)
PA 6.6
yes
Ni (nickel)
compliant
Environmental conditions
-40 °C
70 °C
-40 °F
158 °F
-40 °C
70 °C
-40 °F
158 °F
Check US distributor inventory
Accessories
Accessory of
Part number
130910-I
4250184105473
Downloads
× Do you have any questions?